The buckle machine has become more and more important in the industrial production process, and the frequency of application is getting higher and higher. However, some users are not able to maintain and protect the buckle machine very well, which makes the service life of the product shorter. Then let's share with you how to maintain and protect.
1. Add a smooth oil to the slider, eccentric wheel, pulley and rotating part once a week. Inject smooth oil into the oil hole every day and keep the parts of the machine smooth.
2. The mechanics check each day according to the requirements of the equipment inspection and maintenance project to ensure the normal operation of the sewing machine and make a record.
3. Regularly check whether the screws and fastening parts of each part are locked, and do not allow looseness; check whether the power cord is aging or not, and whether the socket contact is outstanding and reliable, and repair and replace it in time.
4. Each operator must understand the relevant machine repair and maintenance.
5. The buckle machine has not been used for a long time. It should be finished first, covered with a protective cover, and kept in a safe place. It should be smoothed once in half a year and idling for a short time.
Then the above simply introduces the next protection and maintenance. The key point is that we can insist on the above points when using the buckle machine, then the service life of the buckle machine will be longer. In addition to these, we usually present some problems, the most important thing is to learn to solve such problems from the source:
a. Stop unsafe work in the operation! Stop two people from operating one machine together! Be highly focused on your work and don't talk to others to avoid distraction.
b. When the button is turned on, the fingers and clothes should be separated from the mold working area to avoid the combination of the clutch and the injured. If there is no riveting, the vehicle cannot be used.
c. Adjust the machine and troubleshoot the power supply. When you get off work, you should organize the machine and keep the materials and close the power supply.
d. The mold installation should be tight and secure, and concentric. The riveting gap is adjusted by the upper die and the high point downwards. Avoid the damage of the machine with the top cow, the mold must meet the quality requirements, and the material is tight.
Therefore, after we pay attention to these problems in the specific operation, in fact, we rarely present any problems when using the button machine. We must adhere to outstanding use habits and still have a lot of convenience.
